Panasonic ZEQUO 2200 Operating Instructions Manual page 60

6. Access Control List (ACL) Commands
 Parameters
profile_id
Specify the index of the access list profile.
<value 1-6>
Specify the value between 1 and 6.
profile_name
Specify the profile name.
<name 1-32>
Specify the profile name. The maximum length is 32 characters.
add access_id
Specify the index of the access list entry. The lower the access ID, the higher the priority.
auto_assign
Specify to automatically assign the access ID.
<value 1-256>
Specify a value between 1 and 256.
ethernet Specify an Ethernet access control list rule.
vlan Specify the VLAN name.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanidSpecify the VLAN ID.
<vlanid 1-4094>
Specify the VLAN ID between 1 and 4094.
mask (Optional) Specify the mask.
<hex 0x0-0x0fff>
source_mac
Specify the source MAC address.
<macaddr>
Specify the source MAC address.
mask (Optional) Specify the mask.
<macmask>
destination_mac
Specify the destination MAC address.
<macaddr>
Specify the destination MAC address.
mask (Optional) Specify the mask.
<macmask>
802.1p
Specify the value of the 802.1p priority tag.
<value 0-7>
Specify the value of the 802.1p priority tag. The priority tag ranges from 1 to
7.
ethernet_type
Specify the Ethernet type.
<hex 0x0-0xffff>
Specify the Ethernet type.
Specify the mask.
Specify the mask.
Specify the mask.
60