67. 802.1X Commands
Example
To configure the state of the RADIUS accounting service shell to enable:
Zxxx0:admin# config accounting service shell state enable
Command: config accounting service shell state enable
Success
Zxxx0:admin#
67.30. show accounting service
Description
This command is used to display RADIUS accounting service information.
Format
show accounting service
Parameters
None.
Restrictions
None.
Example
To display accounting service information:
Zxxx0:admin#show accounting service
Command: show accounting service
Accounting State
-------------------
Network : Disabled
Shell
: Disabled
System
: Disabled
Zxxx0:admin#
680