Panasonic ZEQUO 2200 Operating Instructions Manual page 144

17. Didital Diagnostic Monitoring (DDM) Commands
Zxxx0:admin# config ddm ports 11 state enable shutdown alarm
Command: config ddm ports 11 state enable shutdown alarm
Success.
Zxxx0:admin#
17.8. config ddm log
 Description
Enable or disable the log when parameters of the optic module exceed its DDM threshold.
The command configures the DDM log action when encountering an exceeding alarm or
warning thresholds event.
 Format
config ddm log [enable | disable ]
 Parameters
log Specifies whether to send a log, when the operating parameter exceeds the
corresponding threshold.
The DDM log is enabled by default.
 Restrictions
Administrators and operators.
 Example
To configure DDM log state to enable:
Zxxx0:admin# config ddm log enable
Command: config ddm log enable
Success.
Zxxx0:admin#
144