Panasonic ZEQUO 2200 Operating Instructions Manual page 661

Zxxx0:admin# config 802.1x auth_parameter ports 1-20 direction both
Command: config 802.1x auth_parameter ports 1-20 direction both
Success.
Zxxx0:admin#
67.12. config 802.1x authorization attributes
radius
 Description
This command is used to enable or disable the acceptation of an authorized
configuration. (To configure that attributes, regarding VLAN, 802.1p, ACL and
Ingress/Egress Bandwidth, please refer to the Appendix section at the end of this
document.)
 Format
config 802.1x authorization attributes radius [enable | disable]
 Parameters
enable The authorization attributes such as VLAN, 802.1p default priority, and ACL assigned by
the RADUIS server will be accepted if the global authorization status is enabled. The
default state is enabled.
disable The authorization attributes assigned by the RADUIS server will not be accepted.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the 802.1X state of acceptation of an authorized configuration:
Zxxx0:admin#config 802.1x authorization attributes radius enable
Command: config 802.1x authorization attributes radius enable
Success.
Zxxx0:admin#
661
67. 802.1X Commands