Panasonic ZEQUO 2200 Operating Instructions Manual page 352

39. MAC-based Access Control Commands
 Format
config mac_based_access_control authorization attributes {radius [enable | disable] |
local [enable | disable]}(1)
 Parameters
radius Specify to enable or disable the authorized attributes assigned by the RADIUS server that
will be accepted.
enable
If specified to enable, the authorized attributes (for example VLAN, 802.1p default
priority, and ACL) assigned by the RADIUS server will be accepted if the global
authorization status is enabled. The default state is enabled.
disable
If specified to disable, the authorized attributes (for example VLAN, 802.1p default
priority, and ACL) assigned by the RADIUS server will not be accepted even if the
global authorization status is enabled.
local Specify to enable to disable the authorized attributes assigned by the local database.
enable
If specified to enable, the authorized attributes assigned by the local database will
be accepted if the global authorization status is enabled. The default state is
enabled.
disable
If specified to disable, the authorized attributes assigned by the local database will
not be accepted even if the global authorization status is enabled.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To disable the configuration authorized from the local database:
Zxxx0:admin#config mac_based_access_control authorization attributes local disable
Command: config mac_based_access_control authorization attributes local disable
Success.
Zxxx0:admin#
352