Table of Contents
Advertisement
force_agree
(Optional) Specify and the reset command will be executed immediately without further
confirmation.
If no keyword is specified, all parameters will be reset to default settings
except IP address, user account, and history log, but the device will
neither save nor reboot.
Restrictions
Only Administrator-level users can issue this command.
Example
To reset the system configuration settings:
Zxxx0:admin#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
Zxxx0:admin#
To reset all system parameters, save, and restart the Switching Hub:
Zxxx0:admin#reset system
Command: reset system
Are you sure to proceed with system reset, save and reboot?(y/n)
Loading factory default configuration... Done.
Saving all configuration to NV-RAM... Done.
Please wait, the switch is rebooting...
5. Basic Management Commands
45
Advertisement
Table of Contents
