Panasonic ZEQUO 2200 Operating Instructions Manual page 539

fbpdu Decide if this port will flood STP BPDU when STP functionality is disabled.
enable
Enable port to flood STP BPDU when STP functionality is disabled.
disable
Disable port from flooding STP BPDU when STP functionality is disabled.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure STP ports:
Zxxx0:admin# config stp ports 1 externalCost auto
Command: config stp ports 1 externalCost auto
Success.
Zxxx0:admin#
54.15. config stp mst_ports
 Description
Internal Path Cost and Port Priority of a Port in MSTI can be separately configured to
different values from the configuration of CIST (instance ID = 0).
 Format
config stp mst_ports <portlist> instance_id <value 0-64> {internalCost [auto | <value 1-
200000000>] | priority <value 0-240>}(1)
54. Spanning Tree Protocol (STP) commands
539