Table of Contents
Advertisement
conform (Optional) This field denotes the green packet flow. Green packet flows may have their
DSCP field rewritten to a value stated in this field. Users may also choose to count green
packets by using counter parameter.
permit
Enter this parameter to allow packet flows that are in the green flow.
replace_dscp
Packets that are in the green flow may have their DSCP field rewritten using this
parameter and entering the DSCP value to replace.
<value 0-63>
Specify the value between 0 and 63.
counter
(Optional) Use this parameter to enable or disable the packet counter for the
specified ACL entry in the green flow.
enable
Enable the packet counter for the specified ACL entry in the green flow.
disable
Disable the packet counter for the specified ACL entry in the green flow.
exceed
(Optional) This field denotes the yellow packet flow. Yellow packet flows may have
excess packets permitted through or dropped. Users may replace the DSCP field of these
packets by checking its radio button and entering a new DSCP value in the allotted field.
permit
Enter this parameter to allow packet flows that are in the yellow flow.
replace_dscp
Specifies to change the DSCP of the packet.
<value 0-63>
Enter the replacement DSCP of the packet here. This value must be between
0 and 63.
drop Enter this parameter to drop packets that are in the yellow flow.
counter
(Optional) Use this parameter to enable or disable the packet counter for the
specified ACL entry in the green flow.
enable
Enable the packet counter for the specified ACL entry in the green flow.
disable
Disable the packet counter for the specified ACL entry in the green flow.
violate
This field denotes the red packet flow. Red packet flows may have excess packets
permitted through or dropped. Users may replace the DSCP field of these packets by
checking its radio button and entering a new DSCP value in the allotted field.
permit
Enter this parameter to allow packet flows that are in the red flow.
replace_dscp
Specifies to change the DSCP of the packet.
<value 0-63>
Enter the replacement DSCP of the packet here. This value must be between
0 and 63.
drop Enter this parameter to drop packets that are in the red flow.
counter
(Optional) Use this parameter to enable or disable the packet counter for the
specified ACL entry in the green flow.
enable
Enable the packet counter for the specified ACL entry in the green flow.
disable
Disable the packet counter for the specified ACL entry in the green flow.
6. Access Control List (ACL) Commands
75
Advertisement
Table of Contents
