Panasonic ZEQUO 2200 Operating Instructions Manual page 190

23. FDB Commands
23.5. config fdb aging_time
 Description
This command is used to set the age-out timer for the Switching Hub's dynamic
unicast MAC address forwarding tables.
 Format
config fdb aging_time <sec 10-1000000>
 Parameters
<sec 10-1000000> - Specify the time in seconds that a dynamically learned MAC address will
remain in the Switching Hub's MAC address forwarding table without being accessed,
before being dropped from the database. The range of the value is 10 to 1000000. The
default value is 300.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure MAC address aging time:
Zxxx0:admin#config fdb aging_time 300
Command: config fdb aging_time 300
Success.
Zxxx0:admin#
190