17.11. show ddm ports status
Description
This command is used to show the current operating DDM parameters values of the optic
module of the specified ports. This command displays the current operating parameters of
the optic modules.
Format
show ddm ports {<portlist> } status
Parameters
ports
<portlist>
Specifies a range of ports to be displayed.
If the port parameter is not specified, all optic ports' operating parameters will be
displayed.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To show port 21-23's operating parameters:
Zxxx0:admin#
show ddm ports 21-23 status
Command: show ddm ports 21-23 status
Port
Temperature
(in Celsius)
------ ------------- --------- ------------- ---------- -----------
21
-
22
25.0625
23
-
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
17. Didital Diagnostic Monitoring (DDM) Commands
Voltage
Bias-Current
(V)
(mA)
-
-
3.5036
12.6473
-
-
147
TX-Power
RX-Power
(dBm)
(dBm)
-
-
-9.9097
-5.4166
-
-