Panasonic ZEQUO 2200 Operating Instructions Manual page 240

27. IGMP Snooping Commands
27.15. show igmp_snooping statistic counter
 Description
This command is used to display the IGMP snooping statistics counter for IGMP
protocol packets that are transmitted or received by the Switching Hub since IGMP
snooping was enabled.
 Format
show igmp_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> |
ports <portlist>]
 Parameters
vlan Specify a VLAN to be displayed.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid Specify a list of VLANs to be displayed.
<vlanid_list>
Specify the VLAN ID list.
ports Specify a list of ports to be displayed.
<portlist>
Specify a list of ports.
 Restrictions
None.
 Example
To display the IGMP snooping statistics counter for port 1:
240