Show Lldp - Panasonic ZEQUO 2200 Operating Instructions Manual

36. LLDP Commands
To configure the delay-interval interval:
Zxxx0:admin#config lldp tx_delay 8
Command: config lldp tx_delay 8
Success.
Zxxx0:admin#
To change the re-initialization delay interval to five seconds:
Zxxx0:admin#config lldp reinit_delay 5
Command: config lldp reinit_delay 5
Success.
Zxxx0:admin#

36.4. show lldp

 Description
This command is used to display LLDP.
 Format
show lldp
 Parameters
None.
 Restrictions
None.
306