Show Ports - Panasonic ZEQUO 2200 Operating Instructions Manual

58. Switch Port Commands

58.2. show ports

 Description
This command is used to display the current configurations of a range of ports.
 Format
show ports {<portlist>} {[description | err_disabled | auto_negotiation | details |
media_type]}
 Parameters
<portlist>(Optional) Specify a range of ports to be displayed.
description
(Optional) Specify to display the port description.
err_disabled
(Optional) Specify to display disabled information.
auto_negotiation
(Optional) Specifies to display detailed auto-negotiation information.
details (Optional) Specify to indicate if port detail information will be included in the display.
media_type
(Optional) Specify to display the current port media type. For FE ports, the media type
should be 100BASE-T. For GE ports (the combo port), if the current active port is the fiber
port, the media type is 1000BASE-X or 100BASE-X; if the current active port is the copper
port, the media type is 1000BASE-T.
If no parameter is specified, all ports will be displayed.
 Restrictions
None.
 Example
To display the configuration of ports 1 to 4:
566