39. MAC-based Access Control Commands
Example
To disable MAC-based access control:
Zxxx0:admin#disable mac_based_access_control
Command: disable mac_based_access_control
Success.
Zxxx0:admin#
39.3. config mac_based_access_control
password
Description
This command is used to set the password that will be used for authentication via
RADIUS server.
Format
config mac_based_access_control password <passwd 16>
Parameters
<passwd 16>
In RADIUS mode, the Switching Hub communicates with the RADIUS server using this
password. The maximum length of the key is 16 characters.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the password "rosebud" that will be used for authentication via RADIUS
server:
Zxxx0:admin#config mac_based_access_control password rosebud
Command: config mac_based_access_control password rosebud
Success.
Zxxx0:admin#
342