Login Banner And Prompt Commands - Panasonic ZEQUO 2200 Operating Instructions Manual

42. Login Banner and Prompt Commands

42.Login Banner and Prompt Commands
These commands are used to change the command line interface (CLI) command
prompt.
config command_prompt [<string 16> | username | default]
42.1. config command_prompt
 Description
This command is used to modify the command prompt. The current command prompt
consists of four parts: "product name" + ":" + "user level" + "#" (e.g. "Zxxx0:admin#"). This
command is used to modify the first part (1. "product name") with a string consisting of a
maximum of 16 characters, or to be replaced with the users' login user name.
 Format
config command_prompt [<string 16> | username | default]
 Parameters
<string 16>
Specify the new command prompt string of no more than 16 characters.
username
Specify the command to set the login username as the command prompt.
default Specify the command to return the command prompt to its original factory default value.
 Restrictions
When users issue the "reset" command, the current command prompt will remain in tact.
Issuing the "reset system" will return the command prompt to its original factory default
value.
Only Administrator and Operator-level users can issue this command.
 Example
To edit the command prompt:
Zxxx0:admin#config command_prompt HQ0001
Command: config command_prompt HQ0001
Success.
HQ0001:admin#
390