7. ARP Commands
<macaddr>
The MAC address corresponding to the IP address above.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a static ARP entry for the IP address 10.48.74.121 and MAC address
00:50:BA:00:07:36:
Zxxx0:admin#create arpentry 10.48.74.121 00-50-BA-00-07-36
Command: create arpentry 10.48.74.121 00-50-BA-00-07-36
Success.
Zxxx0:admin#
7.2.
delete arpentry
Description
This command is used to delete a static ARP entry, made using the create arpentry
command above, by specifying either the IP address of the entry or all. Specifying all
deletes the Switching Hub
Format
delete arpentry [<ipaddr> | all]
Parameters
<ipaddr>The IP address of the end node or station.
all
Delete all ARP entries
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an entry of IP address 10.48.74.121 from the ARP table:
Zxxx0:admin#delete arpentry 10.48.74.121
Command: delete arpentry 10.48.74.121
Success.
Zxxx0:admin#
s ARP table.
'
80