Table of Contents
Advertisement
Basic Instructions for the Use of This Product
●For internal inspection and/or repair, please contact the shop.
●Use commercial power supply from a wall socket, which is close and easily
accessible to this Switching Hub.
●Unplug the power cord when installing or moving this Switching Hub.
●Unplug the power cord when cleaning this Switching Hub.
●Use this Switching Hub within the specifications. Deviation could lead to
malfunctions.
●Do not touch the metal terminal of the RJ45 connector, the modular plug
of connected twisted pair cable and serial port, or the metal terminal of the
SFP extension slot. Do not place charged objects in the proximity of them.
Static electricity could lead to equipment failure.
●Do not put the modular plug of the connected twisted pair cable on objects
that can carry static charge, such as a carpet. Do not place it in the proxim-
ity. Static electricity could lead to equipment failure.
●Before connecting a console cable to the console port, discharge static elec-
tricity, for example by touching metal appliance (do not discharge by
touching this Switching Hub).
●Do not put a strong shock, including dropping, to this Switching Hub.
Deviation could lead to equipment failure.
●Do not store and/or use this Switching Hub in the environment with the
characteristics listed below.
(Store and/or use this Switching Hub in the environment in accordance with the
specification.)
- High humidity. Possible spilled liquid (water).
- Dusty. Possible static charge (such as carpet).
- Under direct sunlight.
- Possible condensation. High/low temperature exceeding the
environment specifications.
- Strong vibration and/or strong shock.
●Please use this Switching Hub in place where ambient temperature is from
0 to 50 degrees C. Failure to meet the above conditions may result in fire,
electric shock, breakdown, and/or malfunction. Please take notice because
such cases are out of guarantee. Additionally, do not cover the bent hole of
this Switching Hub.
Deviation could lead to high internal temperature, equipment failure and/or
malfunction.
●When stacking Switching Hubs, leave a minimum of 20 mm space between
them.
●Please note that operation will not be guaranteed if any SD card other than
the separately sold Panasonic SD card is installed into the SD card slot.
Format the card with this Switching Hub.
9
Advertisement
Table of Contents
