Table of Contents
Advertisement
55. SSH Commands
Parameters
maxsession
Specify the SSH server maximum session at the same time.
<int 1-8>
Specify the SSH server maximum session at the same time. The maximum session
value must be between 1 and 8. The default value is 8.
contimeout
Specify the SSH server connection timeout.
<sec 120-600>
Specify the SSH server connection timeout. The connection timeout value must be
between 120 and 600 seconds. The default value is 120 seconds.
authfail Specify the user maximum fail attempts.
<int 2-20>
Specify the user maximum fail attempts. The maximum authentication fail
attempts must be between 2 and 20. The default value is 2.
rekey
(Optional) Specify the time to re-generate the session key.
10min
Specify 10 minutes to re-generate the session key.
30min
Specify 30 minutes to re-generate the session key.
60min
Specify 60 minutes to re-generate the session key.
never Do not re-generate the session key.
port
Specify a TCP port number between 1 and 65535.
<tcp_port_number 1-65535>
Specify a TCP port number between 1 and 65535.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure an SSH server maximum session of 3:
Zxxx0:admin#config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
Zxxx0:admin#
548
Advertisement
Table of Contents
