Panasonic ZEQUO 2200 Operating Instructions Manual page 66

6. Access Control List (ACL) Commands
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure an access list entry:
Zxxx0:admin#config access_profile profile_id 1 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp port 1 permit
Command: config access_profile profile_id 1 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp port 1 permit
Success.
Zxxx0:admin#
6.4. show access_profile
 Description
This command is used to display the current access list table.
 Format
show access_profile {[profile_id <value 1-6> | profile_name <name 1-32>]}
 Parameters
profile_id
(Optional) Specify the index of the access list profile.
<value 1-6>
Specify the profile ID between 1 and 6.
profile_name
(Optional) Specify the name of the access list profile.
<name 1-32>
Specify the profile name between 1 and 32.
 Restrictions
None.
66