Panasonic ZEQUO 2200 Operating Instructions Manual page 307

 Example
To display LLDP:
Zxxx0:admin#show lldp
Command: show lldp
LLDP System Information
Chassis ID Subtype
Chassis ID
System Name
System Description
System Capabilities
LLDP Configurations
LLDP Status
LLDP Forward Status
Message TX Interval
Message TX Hold Multiplier: 4
ReInit Delay
TX Delay
Notification Interval
Zxxx0:admin#
36.5. config lldp forward_message
 Description
This command is used to configure LLDP forwarding messages. When LLDP is disabled
and LLDP forward message is enabled, the received LLDPDU packet will be
forwarded. The default state is disabled.
 Format
config lldp forward_message [enable | disable]
 Parameters
enable Enable LLDP forwarding messages.
disable Disable LLDP forwarding messages.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
: MAC Address
: 00-11-22-33-44-55
:
: Gigabit Ethernet Switch
: Repeater, Bridge
: Disabled
: Disabled
: 30
: 2
: 2
: 5
307
36. LLDP Commands