Table of Contents
Advertisement
Basic operations
Setting enable/disable for the AUX1/2
transition
The AUX1/2 transition time and transition enable/disable can
be set.
1 Press the
button to light its indicator, and display
TIME
CAM
the Time menu.
2 Use [F1] to display the AUX1 BUS Trans sub menu.
3 When the transition time is to be set in frame units, use
[F2] for the setting.
4 When the transition time is to be set in second units,
use [F3] to set the seconds and [F4] to set the frames.
Any time from 0 to 999f can be set. The time which can
be set when seconds are used as the display unit differs
depending on the system format.
59.94i:
max. 33s09f
50i:
max. 39s24f
29.97PsF: max. 33s9f
24PsF:
max. 41s15f
5 Use [F4] to set enable or disable for the transition using
the Transition item.
On
Enable
Off
Disable
When disable has been set for the transition, the output
signals are switched with no transition when the output
signals set in AUX1 is switched.
59.94p:
max. 16s39f
50p:
max. 19s49f
25PsF:
max. 39s24f
23.98PsF: max. 41s15f
65
Advertisement
Table of Contents
