Panasonic ZEQUO 2200 Operating Instructions Manual page 531

54.6. delete stp instance_id
 Description
This command is used to delete the specified MST Instance. CIST (Instance 0) cannot be
deleted and you can only delete one instance at a time.
 Format
delete stp instance_id <value 1-64>
 Parameters
<value 1-64>
Specify the MSTP instance ID. Instance 0 represents the default instance CIST. This value
must be between 1 and 64.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To delete an MSTP instance:
Zxxx0:admin#delete stp instance_id 2
Command: delete stp instance_id 2
Success.
Zxxx0:admin#
54. Spanning Tree Protocol (STP) commands
531