7.7.
show ipfdb
Description
This command is used to display the IP address forwarding table on the Switch.
Format
show ipfdb {[ip_address <ipaddr> | interface <ipif_name 12> | port <port>]}
Parameters
ip_address
(Optional) Specifies the IP address of the forwarding table.
<ipaddr>
Enter the IP address to be displayed.
interface(Optional)Specifies the interface name of the forwarding table.
<ipif_name 12>
Enter the interface name here. This name can be up to 12 characters long.
port
(Optional) Specifies the port to be displayed.
<port>
Enter the port number to be displayed.
Restrictions
None.
Example
To display the IP address forwarding table on the Switch:
Zxxx0:admin# show ipfdb
Command: show ipfdb
Interface
IP Address
------------
---------------- --------- ---------
Total Entries: 0
Zxxx0:admin#
Port
Learned
85
7. ARP Commands