Subnet Vlan Commands - Panasonic ZEQUO 2200 Operating Instructions Manual

57.Subnet VLAN Commands

Subnet VLAN is used to determine a VLAN to which a port belongs
based on the source IP address. Specify the IP address range with the
subnet and map it with a VLAN.
This is available for both IPv4 and IPv6.
MAC-based VLAN and subnet VLAN can be used simultaneously. When
using them simultaneously, you can configure which MAC-based VLAN or
subnet VLAN function is prioritized.
create subnet_vlan [network <network_address> | ipv6network <ipv6networkaddr>] [vlan
<vlan_name 32> | vlanid <vlanid 1-4094>] {priority <value 0-7>}
delete subnet_vlan [network <network_address> | ipv6network <ipv6networkaddr> | vlan
<vlan_name 32> | vlanid <vidlist> | all]
show subnet_vlan {[network <network_address> | ipv6network <ipv6networkaddr> | vlan
<vlan_name 32> | vlanid <vidlist>]}
config vlan_precedence ports <portlist> [mac_based_vlan | subnet_vlan]
show vlan_precedence ports {<portlist>}
Figure 57-1 Subnet VLAN overview
555
57. Subnet VLAN Commands