Panasonic ZEQUO 2200 Operating Instructions Manual page 295

Zxxx0:admin# config max_mcast_group ports 1, 3 max_group 100
Command: config max_mcast_group ports 1, 3 max_group 100
Success.
Zxxx0:admin#
34.9. show max_mcast_group
 Description
This command is used to display the maximum number of multicast groups that a port
or VLAN can join. If the IPv4 or IPv6 option is not specified, IPv4 is implied.
 Format
show max_mcast_group [ports <portlist> | vlanid <vlanid_list>] {[ipv4 | ipv6]}
 Parameters
ports Specify a range of ports to display the maximum number of multicast groups.
<portlist>
Specify a range of ports to be displayed.
vlanid Specify the VLAN ID for displaying the maximum number of multicast groups.
<vlanid_list>
Enter the VLAN ID of the VLAN here.
ipv4 (Optional) Specify to display the maximum number of IPv4 learned addresses.
ipv6 (Optional) Specify to display the maximum number of IPv6 learned addresses.
 Restrictions
None.
 Example
To display the maximum number of multicast groups for ports 1-2:
Zxxx0:admin# show max_mcast_group ports 1-2
Command: show max_mcast_group ports 1-2
Port Max Multicast Group Number
----- --------------------------- ---------
1 Infinite
2 Infinite
Total Entries : 2
Zxxx0:admin#
34. Limited Multicast IP Address Commands
Action
Drop
Drop
295