Panasonic ZEQUO 2200 Operating Instructions Manual page 222

26. Gratuitous ARP Commands
26.7. show gratuitous_arp
 Description
This command is used to display gratuitous ARP configuration.
 Format
show gratuitous_arp {ipif <ipif_name 12>}
 Parameters
ipif (Optional) The interface name of the L3 interface.
<ipif_name 12>
Specify the name of the interface. The maximum length is 12 characters.
 Restrictions
None.
 Example
To display the gratuitous ARP log and trap state:
Zxxx0:admin#show gratuitous_arp
Command: show gratuitous_arp
Send on IPIF Status Up
Send on Duplicate IP Detected : Disabled
Gratuitous ARP Learning
IP Interface Name : System
Gratuitous ARP Trap
Gratuitous ARP Log
Gratuitous ARP Periodical Send Interval : 0
Total Entries: 1
Zxxx0:admin#
: Disabled
: Disabled
: Disabled
: Enabled
222