15. Command Logging Command List
15.Command Logging Command List
The commands are used to log the execution history of commands that
change this Switching Hub's settings.
The history of commands that do not affect the setting changes (e.g.
show) is not stored.
enable command logging
disable command logging
show command logging
15.1. enable command logging
Description
The enable command logging command is used to enable the command logging
function.
When the Switching Hub is under the booting procedure and the
procedure of downloading the configuration to execute immediately, all
configuration commands should not be logged. When the user is under
AAA authentication, the user name should not changed if user uses
"enable admin" command to replace its privilege.
Format
enable command logging
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the command logging function:
120