Panasonic ZEQUO 2200 Operating Instructions Manual page 78

6. Access Control List (ACL) Commands
6.9. show flow_meter
 Description
This command is used to display the flow meter table.
 Format
show flow_meter {[profile_id <value 1-6> | profile_name <name 1-32>] {access_id
<value 1-256>}}
 Parameters
profile_id(Optional) Specify the profile ID.
<value 1-6>
Specify the profile ID. Enter a value between 1 and 6.
profile_name
(Optional) Specify the name of the profile.
<name 1-32>
Specify the name of the profile. The maximum length is 32 characters.
access_id (Optional) Specify the access ID.
<value 1-256>
Specify the access ID. Enter a value between 1 and 256.
 Restrictions
None.
 Example
To display the flow meter configuration:
Zxxx0:admin#show flow_meter
Command: show flow_meter
Flow Meter Information
------------------------------------------------------------------------------
Profile ID:1 Aceess ID:1
CIR(Kbps):1000
Action:
Conform : Permit
Exceed : Permit
Violate : Permit
------------------------------------------------------------------------------
Total Entries: 1
Zxxx0:admin#
Mode : trTCM / ColorBlind
CBS(Kbyte):200
Replace DSCP: 21
Replace DSCP: 21
PIR(Kbps):2000 PBS(Kbyte):200
Counter: Disabled
Counter: Disabled
Counter: Disabled
78