Panasonic ZEQUO 2200 Operating Instructions Manual page 715

69.24. Temperature
# Serverity
1 Warning
2 Informational
3 Informational
4 Informational
69.25. IP Source Address
# Serverity
1 Warning
2 Warning
3 Warning
4 Warning
Log message / Explanation
[Uint <unitID>] Temperature sensor: <sensorID> enter alarm
state. (current Temperature: <temperature>)
Temperature sensor enters alarm state.
[Uint <unitID>] Temperature sensor: <sensorID> recovers to
normal state. (current Temperature: <temperature>)
Temperature recovers to normal.
Sensor value <value>
Temperature sensor read successfully.
Sensor value fail
Temperature sensor read failed.
Log message / Explanation
Dynamic DHCP binding entry conflicts with static ARP
(IP:<ipaddr>, MAC:<macaddr>, Port:<[unitID:]portNum>).
Dynamic DHCP binding entry conflicts with static ARP.
Dynamic DHCP binding entry conflicts with static IPSG entry
(IP:<ipaddr>, MAC:<macaddr>, Port:<[unitID:]portNum>).
Dynamic DHCP binding entry conflicts with static IPSG entry.
Creating DHCP binding entry failed due to no ACL rule being
available (IP:<ipaddr>, MAC:<macaddr>,
Port:<[unitID:]portNum>).
Creating DHCP binding entry failed due to no ACL rule being
available.
Unauthenticated IP-MAC address and discarded by [IPSG |
DAI] (IP:< ipaddr >, MAC:< macaddr >, Port:<[unitID:]portNum
>).
IPSG or DAI checks a host illegal.
715
69. System Log Lists