40.6. disable mirror
Description
This command, combined with the enable mirror command above, allows you to
enable or disable mirror function without having to modify the mirror session
configuration.
Format
disable mirror
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable mirroring configurations:
Zxxx0:admin#disable mirror
Command: disable mirror
Success.
Zxxx0:admin#
40.7. show mirror
Description
This command is used to display the current port mirroring configuration on the
Switching Hub.
Format
show mirror {group_id <value 1-4>}
Parameters
group_id(Optional) Specifies the group ID used for this display.
<value 1-4>
Enter the group ID used for this display here. This value must be between 1 and 4.
367
40. Mirror Commands