Panasonic ZEQUO 2200 Operating Instructions Manual page 457

49.3. delete dot1v_protocol_group
 Description
This command is used to delete a protocol group.
 Format
delete dot1v_protocol_group [group_id <id> | group_name <name 32> | all]
 Parameters
group_idSpecify the group ID to be deleted.
<id> Specify the group ID to be deleted.
group_name
Specify the name of the protocol group to be deleted.
<name 32>
Specify the name of the protocol group to be deleted. The maximum length is 32
characters.
all Specify to delete all protocol groups.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To delete protocol group ID 4:
Zxxx0:admin# delete dot1v_protocol_group group_id 4
Command: delete dot1v_protocol_group group_id 4
Success.
Zxxx0:admin#
49.4. show dot1v_protocol_group
 Description
This command is used to display the protocols defined in protocol groups.
 Format
show dot1v_protocol_group {group_id <id> | group_name <name 32>}
49. Protocol VLAN Commands
457