Debug Stp Config Ports - Panasonic ZEQUO 2200 Operating Instructions Manual

18. Debug Software Command List
Zxxx0:admin# debug stp clear counter ports all
Command : debug stp clear counter ports all
Success.
Zxxx0:admin#

18.8. debug stp config ports

 Description
This command used to configure per-port STP debug level on the specified ports.
 Format
debug stp config ports [<portlist> | all] [event | bpdu | state_machine | all] state [disable |
brief | detail]
 Parameters
ports Specifies the STP port range to debug.
<portlist>
Enter the list of port used for this configuration here.
all Specifies to debug all ports on the Switching Hub.
event Debug the external operation and event processing.
bpdu Debug the BPDU's that have been received and transmitted.
state_machine
Debug the state change of the STP state machine.
all Debug all of the above.
state Specifies the state of the debug mechanism.
disable
Disables the debug mechanism.
brief Sets the debug level to brief.
detail Sets the debug level to detail.
 Restrictions
Only Administrator-level users can issue this command.
 Example
To configure all STP debug flags to brief level on all ports:
Zxxx0:admin# debug stp config ports all all state brief
Command: debug stp config ports all all state brief
Success.
Zxxx0:admin#
158