Panasonic ZEQUO 2200 Operating Instructions Manual page 217

26.1. enable gratuitous_arp
 Description
This command is used to enable the gratuitous ARP trap and log state. The Switching
Hub can trap and log the IP conflict event to inform the administrator.
 Format
enable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
 Parameters
ipif (Optional) The interface name of the L3 interface.
<ipif_name 12>
Specify the name of the interface. The maximum length is 12 characters.
trap Specify trap. The trap is disabled by default.
log Specify log. The even log is enabled by default.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable gratuitous ARP:
Zxxx0:admin#enable gratuitous_arp ipif System trap log
Command: enable gratuitous_arp ipif System trap log
Success.
Zxxx0:admin#
26.2. disable gratuitous_arp
 Description
This command is used to disable the gratuitous ARP trap and log state.
 Format
disable gratuitous_arp {ipif <ipif_name 12>} {trap | log}(1)
26. Gratuitous ARP Commands
217