49. Protocol VLAN Commands
49.6. show port dot1v
Description
This command is used to display the VLAN to be associated with untagged packets
ingressed from a port based on the protocol group.
Format
show port dot1v {ports <portlist>}
Parameters
ports
(Optional) Specify a range of ports to be displayed.
<portlist>
Specify a range of ports to be displayed.
If no parameter is specified, information for all ports will be displayed.
Restrictions
None.
Example
To display the protocol VLAN information for ports 1 to 2:
Zxxx0:admin# show port dot1v ports 1-2
Command: show port dot1v ports 1-2
Port: 1
Protocol Group ID
-------------------
1
Port: 2
Protocol Group ID
-------------------
1
Total Entries
:
2
Zxxx0:admin#
VLAN Name
---------------------------------
default
VLAN Name
---------------------------------
default
460
Protocol Priority
-----------------
-
Protocol Priority
-----------------
1