3.1.3.
SNMP Config
Select "Basic Config" and "SNMP" and then "SNMPConfig" to open the screen
shown in Figure 3-3. On this screen, you can configure the SNMP manager set-
tings.
Screen Description
No.
Displays the entry number on the SNMP manager List.
Status
Displays the SNMP manager status.
Enable
Disable
Privilege
Displays the access privilege of the SNMP manager.
Read-Write
Read-Only
IP Address
This is the IP address for an SNMP manager.
Community
This is the community name used for SNMP access.
Figure 3-3 snMP Config
The SNMP manager is enabled.
The SNMP manager is disabled.
Both the read and write operations are allowed.
Only the read operation is allowed.
21