Snmp Configuration - Panasonic PN28080i Operation Manual

3.3. SNMP Configuration

Configure the SNMP agent setting in "Global configuration mode." Confirm
the configuration information by executing the "show snmp" command in
"Privileged mode."
Command to show the SNMP information
M24eGi#
Command to enable the SNMP agent
M24eGi(config)#
Command to disable the SNMP agent
M24eGi(config)#
Command to set the SNMP management (access permission from/to SNMP
manager)
M24eGi(config)#
Command to delete the SNMP management (access permission from/to
SNMP manager)
M24eGi(config)#
Command to set the SNMP trap (type, IP address, community name)
M24eGi(config)#
Command to delete the SNMP trap (type, IP address, community name)
M24eGi(config)#
Command to create the SNMP group
M24eGi(config)#
Command to delete the SNMP group
M24eGi(config)#
Command to set the read/write/notify view for the SNMP group
M24eGi(config-
snmp-group)#
Command to set the seculity level for the SNMP group
M24eGi(config-
snmp-group)#
Command to create the SNMP user
M24eGi(config)#
Command to delete the SNMP user
M24eGi(config)#
Command to set the SNMP group for the SNMP user
M24eGi(config-
snmp-user)#
Command to set the authentication parameters for the user
M24eGi(config-
snmp-user)#
Command to set the encryption parameters for the user
M24eGi(config-
snmp-user)#
show snmp
snmp-server agent
no snmp-server agent
snmp-server community <id> <community> <ro/rw> <ip-address>
no snmp-server community <id>
snmp-server host <id> type <v1/v2> <ip-address> trap <community>
no snmp-server host <id>
snmp-server group <string> <v1/v2c/v3>
no snmp-server group <string> <v1/v2c/v3>
<read/write/notify> <string>
security-level <noauth_nopriv/auth_nopriv/auth_priv>
snmp-server user <1-10> <string>
no snmp-server user <1-10>
group <string>
authentication {<md5/sha> <string> / encrypted <md5/sha>
<string>}
privilege {des <string>/ encrypted des <string>}
46