Panasonic ZEQUO 2200 Operating Instructions Manual page 254

29. IP Source Address Verify Commands
29.5. config ip_source_binding
 Description
This command is used to update an IPSG entry.
 Format
config ip_source_binding ipaddress <ipaddr> mac_address <macaddr> port <port>]
 Parameters
ipaddr Specify the IP address of the entry being updated.
macaddr Specify the MAC address of the entry being updated.
ports Specify which ports that will use the updated IPSG entry.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure an IPSG entry so that the IP address 10.1.1.1 is bound to the MAC
address 00-00-00-00-00-11 on port 10:
Zxxx0:admin# config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-
00-00-00-11 port 10
Command: config address_binding ip_mac ipaddress 10.1.1.1 mac_address 00-00-00-00-
00-11 port 10
Success.
Zxxx0:admin#
254