Panasonic ZEQUO 2200 Operating Instructions Manual page 411

To clear the configured trap source IP interface:
Zxxx0:admin#config trap source_ipif none
Command: config trap source_ipif none
Success.
Zxxx0:admin#
44.21. show trap source_ipif
 Description
This command is used to display the trap source IP interface.
 Format
show trap source_ipif
 Parameters
None.
 Restrictions
None.
 Example
To display the trap source IP interface:
Zxxx0:admin#show trap source_ipif
Command: show trap source_ipif
Trap Source IP Interface Configuration:
IP Interface
IPv4 Address
IPv6 Address
Zxxx0:admin#
: ipif4
: None
: 3000::52
411
44. Network Management Commands