Panasonic ZEQUO 2200 Operating Instructions Manual page 370

41. MLD Snooping Commands
config mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list>] [add | delete]
<portlist>
config mld_snooping mrouter_ports_forbidden [vlan <vlan_name 32> | vlanid <vlanid_list>] [add |
delete] <portlist>
enable mld_snooping
disable mld_snooping
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list >]}
show mld_snooping group {[vlan <vlan_name 32> | vlanid <vlanid_list> | ports <portlist>]
{<ipv6addr>}}
show mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all] {[static |
dynamic | forbidden]}
show mld_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
config mld_snooping unknow_data_learning [all | vlan_name <vlan_name 32> |
vlanid<vlanid_list>] {state [enable | disable] | aged_out [enable | disable] | expiry_time
<sec 1-65535>}
config mld_snooping unknow_data_learning max_learned_entry <value 1-1024>
clear mld_snooping data_learning_group [all | [vlan_name <vlan_name 32> | vlanid
<vlanid_list>][<ipv6addr> | all]
41.1. config mld_snooping
 Description
This command is used to configure MLD snooping on the Switching Hub.
 Format
config mld_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all] {state [enable
| disable] | fast_done [enable | disable] | proxy_reporting {state [enable | disable] |
source_ip <ipv6addr>}(1)}
 Parameters
vlan_name
Specify the name of the VLAN for which MLD snooping is to be configured.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid Specify the VLAN ID list.
<vlanid_list>
Specify the VLAN ID list.
all Specify to configure all VLANs.
state Enable or disable MLD snooping for the chosen VLAN.
enable
Enable MLD snooping for the chosen VLAN.
disable
Disable MLD snooping for the chosen VLAN.
370