Config Wac User - Panasonic ZEQUO 2200 Operating Instructions Manual

68.12. config wac user

 Description
This command is used to change the VLAN associated with a user.
 Format
config wac user <username 15> [vlan <vlan_name 32> | vlanid <vlanid 1-4094> |
clear_vlan]
 Parameters
<username 15>
Specify the name of user account which will change its VID.
vlan Specify the authentication VLAN name.
<vlan_name 32>
Specify the authentication VLAN name. The VLAN name can be up to 32
characters long.
vlanid Specify the authentication VLAN ID.
<vlanid 1-4094>
Specify the authentication VLAN ID. The VLAN ID must be between 1 and 4094.
clear_vlan
Specify to clear the specified VLAN.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the user's VLAN:
Zxxx0:admin# config wac user abc vlanid 100
Command: config wac user abc vlanid 100
Enter a old password:**
Enter a case-sensitive new password:**
Enter the new password again for confirmation:**
Success.
Zxxx0:admin#
68. Web-based Access Control (WAC) Commands
691