Panasonic ZEQUO 2200 Operating Instructions Manual page 221

26.6. config gratuitous_arp send periodically
ipif
 Description
This command is used to configure the interval for the periodical sending of
gratuitous ARP request packets.
 Format
config gratuitous_arp send periodically ipif <ipif_name 12> interval <value 0-65535>
 Parameters
<ipif_name 12>
Specify the interface name of the L3 interface. The maximum length is 12 characters.
interval The periodically send gratuitous ARP interval time, in seconds.
<value 0-65535>
Specify the value between 0 and 65535. 0 (zero) means not to send gratuitous
ARP request packets periodically. By default, the interval is 0 (zero).
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the gratuitous ARP interval to 5 for the IPIF System:
Zxxx0:admin#config gratuitous_arp send periodically ipif System interval 5
Command: config gratuitous_arp send periodically ipif System interval 5
Success.
Zxxx0:admin#
26. Gratuitous ARP Commands
221