Config Wac Method - Panasonic ZEQUO 2200 Operating Instructions Manual

Zxxx0:admin#config wac ports 1-5 aging_time 200
Command: config wac ports 1-5 aging_time 200
Success.
Zxxx0:admin#

68.5. config wac method

 Description
This command is used to allow specification of the RADIUS protocol used by WAC to
complete RADIUS authentication. WAC shares other RADIUS configuration with
802.1X. When using this command to set the RADIUS protocol, users must make sure
the RADIUS server added by the config radius command supports the protocol.
 Format
config wac method [local | radius]
 Parameters
local Specify the authentication will be done via the local database.
radius Specify the authentication will be done via the RADIUS server.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To configure the WAC authentication method:
Zxxx0:admin#config wac method radius
Command: config wac method radius
Success.
Zxxx0:admin#
68. Web-based Access Control (WAC) Commands
685