Panasonic ZEQUO 2200 Operating Instructions Manual page 21

Zxxx0:admin# config ipif System ipaddress 10.24.22.100/255.0.0.0
Command: config ipif System ipaddress 10.24.22.100/8
Success.
Zxxx0:admin#
In the above example, the Switching Hub was assigned an IP address of 10.24.22.100
with a subnet mask of 255.0.0.0. The system message Success indicates that the
command was executed successfully. The Switch can now be configured and
managed via Telnet, SNMP MIB browser and the CLI or via the Web-based
management agent using the above IP address to connect to the Switching Hub.
There are a number of helpful features included in the CLI. Entering the ? command will
display a list of all of the top-level commands.
Zxxx0:admin#?
Command: ?
..
?
cable_diag ports
cd
change drive
clear
clear address_binding dhcp_snoop binding_entry ports
clear address_binding nd_snoop binding_entry ports
clear arptable
clear attack_log
clear counters
clear dhcp binding
clear dhcp conflict_ip
clear dhcpv6 binding
CTRL+C ESC q Quit SPACE n
When entering a command without its required parameters, the CLI will prompt you with a
Next possible completions: message.
Zxxx0:admin#config account
Command: config account
Next possible completions:
<username>
Zxxx0:admin#
In this case, the command config account was entered with the parameter <username>.
The CLI will then prompt to enter the <username> with the message, Next possible
completions:. Every command in the CLI has this feature, and complex commands have
several layers of parameter prompting.
In addition, after typing any given command plus one space, users can see all of the next
possible sub-commands, in sequential order, by repeatedly pressing the Tab key.
Next Page ENTER Next Entry
21
4. Using Command Line Interface
a All