Config Ssh Algorithm - Panasonic ZEQUO 2200 Operating Instructions Manual

55. SSH Commands

55.1. config ssh algorithm

 Description
This command is used to configure the SSH service algorithm.
 Format
config ssh algorithm [3DES | AES128 | AES192 | AES256 | arcfour | blowfish | cast128
| twofish128 | twofish192 | twofish256 | SHA1 | RSA | DSA] [enable | disable]
 Parameters
3DES Specify an SSH server encryption algorithm.
blowfish Specify an SSH server encryption algorithm.
AES(128,192,256)
Specify an SSH server encryption algorithm.
arcfour Specify an SSH server encryption algorithm.
cast128 Specify an SSH server encryption algorithm.
twofish (128,192,256)
Specify an SSH server encryption algorithm.
MD5 Specify an SSH server data integrality algorithm.
SHA1 Specify an SSH server data integrality algorithm.
DSA Specify an SSH server public key algorithm.
RSA Specify an SSH server public key algorithm.
enable Specify to enable the algorithm.
disable Specify to disable the algorithm.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable an SSH server public key algorithm:
Zxxx0:admin#config ssh algorithm DSA enable
Command: config ssh algorithm DSA enable
Success.
Zxxx0:admin#
542