63.10. config configuration
Description
This command is used to select a configuration file as the next boot up configuration
or to apply a specific configuration to the system.
Format
config configuration {unit <unit_id 1-4>} <pathname> [boot_up | active]
Parameters
unit
(Optional) Specifies the unit ID used.
<unit_id 1-4>
Enter the unit ID used here.
<pathname>
Specifies a configuration file on the device file system.
boot_up Specify as boot up file.
active
Specifies to apply the configuration.
Restrictions
Only Administrator-level users can issue this command.
Example
To configure the specific configuration file as boot up:
Zxxx0:admin#config configuration 1 boot_up
Command: config configuration 1 boot_up
Success
Zxxx0:admin#
599
63. Utility Commands