44. Network Management Commands
Example
To prevent SNMP traps from being sent from the Switching Hub:
Zxxx0:admin#disable snmp traps
Command: disable snmp traps
Success.
Zxxx0:admin#
44.12. enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP authentication trap support:
Zxxx0:admin#enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
Zxxx0:admin#
404