24. File System Management Commands
24.12. change drive
Description
This command is used to change the current drive.
Format
change drive {unit <unit_id>} <drive_id>
Parameters
unit
(Optional) Specifies the unit ID in the stacking system. If not specified, it refers to the
master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. The format of drive_id is 'c:', or 'd:'.
Restrictions
None.
Example
To display the storage media's information:
Zxxx0:admin# change drive unit 3 c:
Command: change drive unit 3 c:
Current work directory: "/unit3:/c:".
Zxxx0:admin#
208