16.Network Access Authentication
Command List
The commands are used to configure the authentication server settings for
network access authentication.
config authentication ports [<portlist> | all] {auth_mode [port_based | host_based {vlanid
<vidlist> state [enable | disable}(1)
config authentication mac_format {case [lowercase | uppercase] | delimiter {[hyphen | colon |
dot | none] | number [1 | 2 | 5]}(1)}(1)
show authentication ports {<portlist>}
enable authorization network attributes
disable authorization network attributes
show authorization
config authentication server failover [local | permit | block]
show authentication
show authentication mac_format
16.1. config authentication ports
Description
This command is used to configure security port(s).
Format
config authentication ports [<portlist> | all] {auth_mode [port_based | host_based {vlanid
<vid_list> state [enable | disable]}]}(1)
16. Network Access Authentication Command List
123