Panasonic ZEQUO 2200 Operating Instructions Manual page 618

64. Voice VLAN Commands
Zxxx0:admin#config voice_vlan ports 4-6 state enable
Command: config voice_vlan ports 4-6 state enable
Success.
Zxxx0:admin#
To set voice VLAN ports 4 to 6 to auto mode:
Zxxx0:admin#config voice_vlan ports 4-6 mode auto
Command: config voice_vlan ports 4-6 mode auto
Success.
Zxxx0:admin#
64.6. config voice_vlan log state
 Description
This command is used to configure the voice VLAN log state.
 Format
config voice_vlan log state [enable | disable]
 Parameters
enable Specify to enable the voice VLAN log state.
disable Specify to disable the voice VLAN log state.
 Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To enable the voice VLAN log state:
Zxxx0:admin#config voice_vlan log state enable
Command: config voice_vlan log state enable
Success.
Zxxx0:admin#
618