Table of Contents
Advertisement
Troubleshooting
* Check if equipment with a fixed port mode is connected to any ports from 25 to
28. Change the settings for ports 25 to 28 of the Switching Hub and the opposed
ports to auto-negotiation or the same port speed in the full-duplex mode.
* Check if equipment of which port mode is set to the half-duplex mode is con-
nected to ports 25 to 28.
Ports 25 to 28 do not link up with equipment in the half-duplex mode. Connect
such equipment to ports 1 to 24.
724
Advertisement
Table of Contents
